Skip to main content
SNYDERSTAIRS
New stained hardwood treads on a finished open stair — Lehigh Valley tread replacement
Northampton County · 18042 · Free estimate

Tread Replacement inEaston, PA.

Tread replacement swaps worn, painted, or thin treads for solid hardwood matched to your floor by species. For Easton's West Ward rowhouses — often built with painted poplar treads — and College Hill homes, we template the stair, build and finish treads in Whitehall, and set them in about a day. Typically from about $3,000, with roughly four weeks of fabrication first.

─── Call line
(610) 443-2240Talk to a person · budget on the first call
The short answer

Stair tread replacement in Easton, PA.

Tread replacement swaps worn, painted, or thin treads for solid hardwood matched to your floor by species. For Easton's West Ward rowhouses — often built with painted poplar treads — and College Hill homes, we template the stair, build and finish treads in Whitehall, and set them in about a day. Typically from about $3,000, with roughly four weeks of fabrication first.

Built & reviewed by Snyder Stairs · Whitehall, PA · Est. 1987 · Updated June 2026

Built for Easton

Tread Replacement that fits the homes here.

Easton's West Ward rowhouses were originally built with painted poplar treads and a skirt board against one wall — and the most common West Ward call is a tread-and-riser replacement after the floors are refinished, so the stair matches the new floor species. These straight-run box stairs finish in three to four days on site. Our Center Valley remodel shows the matched-floor result.

Tread replacement — full service detail
What we do here

Tread Replacement for Eastonhomes — what's involved.

  • Templated to the run

    West Ward straight-run box stairs are narrow and rarely uniform — we template each tread so it sits tight to the skirt board.

  • Matched to your floor by species

    Red oak, white oak, or a darker walnut — matched to the species of the floors you just refinished, so the stair flows into the room.

  • Built in Whitehall

    Building and sanding happen at our shop, not on your Easton stairs — no dust or fumes through a row house. Treads arrive unfinished.

  • Days on site, not weeks

    Standard West Ward and College Hill flights install in a day; the longest part is the ~4 weeks of shop fabrication first.

What it runs

From about $3,000 for a standard Easton flight · ~4 weeks fabrication before install

Timeline

~1 day on site (3–4 days for a full tread-and-riser rowhouse run) · delivered unfinished

Ballpark, not a bid — every Easton stair is different. We give you a firm number after a free in-home measure. Budget on the first call · (610) 443-2240.

Tread detail with light hardwood treads — Faucett period restoration
A local project

The Faucett · Easton, PA

Faucett period restoration, Hackettstown NJ — oak treads cut and fit in our Whitehall shop. The same matched-by-species tread work we run on Easton West Ward rowhouses after a floor refinish.

View this project
Frequently asked

Tread Replacement in Easton — your questions, answered.

↳ Or call (610) 443-2240
How much does stair tread replacement cost in Easton?

A standard Easton flight starts around $3,000 and rises with tread count, species, and whether risers and the skirt are included. A full West Ward rowhouse tread-and-riser run is more than a treads-only job. That's a range to set expectations, not a quote — we confirm firm after templating your stair.

Can you match new treads to floors I just refinished in my Easton home?

Yes — that's the most common West Ward request. We match the treads to your floor's species so the refinished floor flows straight into the stair, whether that's a darker walnut or a natural oak.

Do West Ward rowhouse stairs need the whole staircase replaced?

No — usually just the treads. The straight-run box structure is typically sound; we replace the original painted poplar treads with hardwood and leave the framing and risers in place. The narrow footprint actually makes these among the faster jobs we do.

How long does tread replacement take in an Easton rowhouse?

About four weeks of shop fabrication after templating, then three to four days on site for a full tread-and-riser run (a single day for a treads-only flight). Treads arrive unfinished, so there's no on-site sanding marathon.

Should I refinish or replace the original treads in my College Hill home?

If the treads are the matching species, thick, uncupped, and sound, refinishing is cheaper and preserves original material — important in a College Hill period home. If the species doesn't match, or they're thin, warped, or deeply worn, new treads are cleaner. We assess on site before you spend.

Talk to a personStill have a question?
Call (610) 443-2240

Ready when you are

Custom stairs and railings, built in Whitehall.

Custom stairs and railings, built by a family of Pennsylvania craftsmen for nearly forty years. We'll give you a realistic budget on the first call — not a teaser, not a pressure-close. Get in touch, or send a few photos.

Budget on the first call · (610) 443-2240 · Whitehall, PA

Atmospheric walnut staircase landing with brass detail — Rambo residence