Templated tread by tread
Historic Bethlehem row-house stairs are rarely uniform — we template each tread so it sits tight to the skirt with no gaps.

Tread replacement swaps worn, carpeted, or thin treads for solid hardwood matched to your floor by species. For Bethlehem homes — Historic District row houses and SteelStacks new builds alike — we template the stair, build and finish treads in Whitehall, and set them in about a day. Typically from about $3,000, with roughly four weeks of fabrication first.
Tread replacement swaps worn, carpeted, or thin treads for solid hardwood matched to your floor by species. For Bethlehem homes — Historic District row houses and SteelStacks new builds alike — we template the stair, build and finish treads in Whitehall, and set them in about a day. Typically from about $3,000, with roughly four weeks of fabrication first.
Built & reviewed by Snyder Stairs · Whitehall, PA · Est. 1987 · Updated June 2026
Bethlehem's 19th-century north-side row houses often hide solid stairs under decades of carpet and worn painted treads, while south-side SteelStacks homeowners want the stair to match newly installed wide-plank floors. Either way, new treads matched to the floor species transform the run without touching the structure. Our Center Valley remodel shows the carpet-to-hardwood result cleanly.
Tread replacement — full service detailHistoric Bethlehem row-house stairs are rarely uniform — we template each tread so it sits tight to the skirt with no gaps.
White oak, maple, or walnut matched to your SteelStacks or row-house floor species, so stair and floor read as one continuous surface.
Building and sanding happen in our Whitehall shop, not in your Bethlehem home — no dust through the house. Risers stay; treads arrive unfinished.
After roughly four weeks of fabrication, the treads install in a single on-site day for a standard flight.
From about $3,000 for a standard Bethlehem flight · ~4 weeks fabrication before install
~1 day on site · matched to your floor by species, delivered unfinished
Ballpark, not a bid — every Bethlehem stair is different. We give you a firm number after a free in-home measure. Budget on the first call · (610) 443-2240.

Faucett period restoration, Hackettstown NJ — oak treads cut and fit in our Whitehall shop. The same matched-by-species tread work we run for Bethlehem's Historic District row houses and SteelStacks new builds.
View this projectA standard Bethlehem flight starts around $3,000 and rises with tread count, species, and whether risers and the skirt are included. That's a range to set expectations, not a quote — we confirm firm after templating your specific stair, since north-side row-house runs and south-side new-build flights price differently.
Yes — it's the most common reason Bethlehem homeowners call. We match the treads to your floor's species, so a SteelStacks wide-plank floor or a refinished row-house floor flows straight into the stair.
Usually just the treads. If the stringers and framing are sound — common even in 19th-century Bethlehem stairs — we replace only the treads, leaving the risers and structure in place to keep cost and disruption down.
About four weeks of shop fabrication after templating, then a single day on site for a standard flight. Treads arrive unfinished and finished to suit, so there's no multi-day staining marathon in your home.
If the treads are the matching species, thick, uncupped, and not chewed up by old carpet tack, refinishing is the cheaper, right call — and in a Historic District home it preserves original material. Thin, warped, or deeply gouged treads, or a species that doesn't match, are cleaner to replace. We assess on site before you spend.
Ready when you are
Custom stairs and railings, built by a family of Pennsylvania craftsmen for nearly forty years. We'll give you a realistic budget on the first call — not a teaser, not a pressure-close. Get in touch, or send a few photos.
Budget on the first call · (610) 443-2240 · Whitehall, PA
